Home
>
Buy, Swap and Sell
>
Topic
Foodlovers Foodtalk Forum
part for Revere Ware pressure cooker
Posted by Christine
part for Revere Ware pressure cooker January 05, 2005 06:06AM |
I need the black rubber plug that goes under the flip up gauge on the lid of my Revere Ware pressure cooker. The cooker is stainless steel with a copper bottom.There are two patent numbers on the bottom, 2272609 and 2363973. There is also the letter S beneath the patent numbers, but no model number.
Re:parts for Revere Ware pressure cooker February 18, 2005 08:06PM |
Christine wrote:
> I need the black rubber plug that goes under the flip up gauge
> on the lid of my Revere Ware pressure cooker. The cooker is
> stainless steel with a copper bottom.There are two patent
> numbers on the bottom, 2272609 and 2363973. There is also the
> letter S beneath the patent numbers, but no model number.
>
>
I also have this same pressure cooker. It also has "other patents pending D"
on it. I think I need the release valve gasket too. It will not build up pressure.
Doris
> I need the black rubber plug that goes under the flip up gauge
> on the lid of my Revere Ware pressure cooker. The cooker is
> stainless steel with a copper bottom.There are two patent
> numbers on the bottom, 2272609 and 2363973. There is also the
> letter S beneath the patent numbers, but no model number.
>
>
I also have this same pressure cooker. It also has "other patents pending D"
on it. I think I need the release valve gasket too. It will not build up pressure.
Doris
Re: part for Revere Ware pressure cooker February 22, 2005 06:27AM |
Re: part for Revere Ware pressure cooker March 01, 2005 05:13AM |
I also need the rubber plug under the pressure gauge. Isn't it a great pressure cooker though, gosh I must use it at least once a week. Always hated my aluminum one. If you hear about these seals we need let me know.
todd
tedk@graffiti.net
todd
tedk@graffiti.net
Re: part for Revere Ware pressure cooker March 01, 2005 07:41PM |
To all you people wanting Revere Ware parts, here's the address to contact:
helpcenter@worldkitchenhelp.com;
Lorna
helpcenter@worldkitchenhelp.com;
Lorna
Re: part for Revere Ware pressure cooker March 09, 2005 07:57AM |
Re:parts for Revere Ware pressure cooker April 13, 2005 07:06PM |
Re: part for Revere Ware pressure cooker May 04, 2005 02:14PM |
I need the black rubber plug that goes under the flip up gauge on the lid of my Revere Ware pressure cooker. I attempted to contact the addrress helpcenter@worldkitchenhelp.com and was told that this site is no longer available. Awaiting a reply. HELP
Re: part for Revere Ware pressure cooker May 27, 2005 01:02AM |
Source for Revere pressure cooker seals? June 10, 2005 06:52AM |
Re: part for Revere Ware pressure cooker June 13, 2005 11:51AM |
Re: part for Revere Ware pressure cooker June 13, 2005 11:21PM |
Re: part for Revere Ware pressure cooker June 14, 2005 01:39AM |
Did not find a new seal ring but supplemented the seal with a 7 inch x 1/16
inch O-ring from a truck repair place and that works and now have a good
seal. It goes on the outer side of the seal in the groove of the seal and
against the edge of the lid. Hope this helps you.
Don't hesitate to contact me if you need help finding the O-ring or any
other questions.
TAZ
inch O-ring from a truck repair place and that works and now have a good
seal. It goes on the outer side of the seal in the groove of the seal and
against the edge of the lid. Hope this helps you.
Don't hesitate to contact me if you need help finding the O-ring or any
other questions.
TAZ
Re: part for Revere Ware pressure cooker June 14, 2005 01:55AM |
In case any of you are looking for the rubber seal that goes under the pressure gage, you can use the "Presto" Automatic Air Vent. I've had my Revere Ware Pressue cooker since the early 50's and still using it. However I would like to know if there is anything I can use (liquid soap, chemical, etc.) that I can put on the rubber Lid seal that will lengthen the life of it. It seems that these seals are impossible to find and I can't think of another that would substitute for it.
R.L. Hillerby
R.L. Hillerby
Re: part for Revere Ware pressure cooker July 21, 2005 04:59AM |
I read your post. I have the identical pressure cooker. I got it at a garage sale, same numbers on the bottom and all. It's heavy gauge stainless steel with the copper bottom and I love using it. About the "O" ring you mentioned in your post -is the inside diameter 7"? I'm asking because the seal is a little wider than that. Many thanks! Robert
Re: part for Revere Ware pressure cooker July 21, 2005 06:04AM |
Re: part for Revere Ware pressure cooker August 02, 2005 11:28PM |
Re: part for Revere Ware pressure cooker August 10, 2005 01:15AM |
instruction manual for Revere (Meal 'N Minutes) Pressure Cooker Model PC-806W August 25, 2005 06:08AM |
Re: part for Revere Ware pressure cooker August 29, 2005 01:32AM |
Re: part for Revere Ware pressure cooker August 29, 2005 03:11AM |
Re: part for Revere Ware pressure cooker August 29, 2005 03:04PM |
Re: part for Revere Ware pressure cooker September 07, 2005 08:57PM |
Re: part for Revere Ware pressure cooker September 12, 2005 01:53AM |
Kudos to Bob and Taz for their very helpful hints! I've got the Patent #2272609 pressure cooker but I have a different set of questions: First, is there supposed to be some sort of rocker on this pressure cooker (like the Presto kind)? There's a place across from the flip-up gauge on the lid, where it looks like there might have been a stem sticking up at one time. On the underside of the lid, there's a round, slotted, protrusion (about 3/8" diameter, and 1/8" thick, with a little hole in the middle that doesn't quite go all the way through the lid.......I can't figure out why it's there, but it looks like it might have been ground off on the top side. Second, does anyone have an instruction manual for this model? It's not clear by her post whether Lu Carrico has this same cooker; mine doesn't have the model number, only the patent numbers. We're also looking for a set of the bakelite grips for the pot (not the lid) handle. I'll appreciate any responses, to the site or to the e-mail address. Thanks!
Re: part for Revere Ware pressure cooker September 15, 2005 01:50AM |
Re: part for Revere Ware sauce pan September 15, 2005 02:05AM |
Re: part for Revere Ware pressure cooker September 21, 2005 06:02AM |
I don't know if they have parts for Ravere Ware pressure cookers, but the Pressure Cooker Centre website in Perth, Western Australia seems to have spare parts for most pressure cooker brands. If they don't have the parts, they might know where you'll find them. Try them at: www.pressurecooker.com.au
Re: part for Revere Ware pressure cooker September 22, 2005 06:44AM |
I have the insruction book and would be glad to copy it for you.do you by any chance have the recipe book that came with it? I am trying to find that. Thanks and let me know where to send the insructionsWendy wrote:
> I don't know if they have parts for Ravere Ware pressure
> cookers, but the Pressure Cooker Centre website in Perth,
> Western Australia seems to have spare parts for most pressure
> cooker brands. If they don't have the parts, they might know
> where you'll find them. Try them at: www.pressurecooker.com.au
> I don't know if they have parts for Ravere Ware pressure
> cookers, but the Pressure Cooker Centre website in Perth,
> Western Australia seems to have spare parts for most pressure
> cooker brands. If they don't have the parts, they might know
> where you'll find them. Try them at: www.pressurecooker.com.au
Re: part for Revere Ware pressure cooker September 25, 2005 11:29PM |
Re: instruction manual for Revere (Meal 'N Minutes) Pressure Cooker Model PC-806W September 27, 2005 07:40AM |
Hi Doreen,
I am also lookin for a copy of the manual, would you mind sharing with me the instruction manual for Revere ( Meal'n Minutes) Pressure Cooker Model PC 806 or Model PC 806W?
FlorenceDoreen Wade wrote:
> I am also looking for a copy of the manual. Does anyone know
> how to find it or does anyone have a copy of it and would like
> to share it.
I am also lookin for a copy of the manual, would you mind sharing with me the instruction manual for Revere ( Meal'n Minutes) Pressure Cooker Model PC 806 or Model PC 806W?
FlorenceDoreen Wade wrote:
> I am also looking for a copy of the manual. Does anyone know
> how to find it or does anyone have a copy of it and would like
> to share it.
Sorry, you can't reply to this topic. It has been closed.